TRI-STEP®
TRI-STEP® is a unique three stepped threaded insert and mating hole combination designed for heat or...
HEADED STEEL INSERT
This M6 headed steel insert is used on Oil Filter Unit and replaces a high cost brass machined part....
SONIC-LOK®
Sonic-Lok® is designed for rapid installation into thermoplastics using heat or ultrasonic. It featu...
HI-TORK
Hi-Tork is designed for high fill plastics with reduced installation depth. It is tolerant of mouldi...
TECH-SONIC©
Tech-Sonic© is a unique combination of opposed knurls and knurled vanes which provides increased per...
MINI-TECH©
A miniature insert with all the design features and characteristics of the Tech-Sonic range. Mini-Te...
TAPER-X®
Taper-X® is designed for fastener installation into a 8° tapered hole. The combination of angled spl...
6030 INSERT
6030 Insert is designed for installation into thermoplastics when the design incorporates a tapered ...
HEAT-LOK®
Heat-Lok® is designed for heat installation into notch sensitive amorphous thermoplastics. It featur...
SCREW-SERT®
Screw-Sert® is designed for installation into a wide range of thermoplastic and thermosetting plasti...
FLO-TECH®
Flo-Tech® is a blind-ended threaded insert designed to meet the needs of those who prefer to mould-i...
MOLD-FORM™
MOLD-FORM is a high strength, low cost, cold formed steel INSERT for PLASTIC, designed for molding-i...
FIN-LOK®
Fin-Lok® is a press-in insert which can be easily installed into most thermoplastic materials. It fe...
PRESS-LOK©
Press-Lok© provides easy installation without the typical high screw installation torque. Its plain ...
P-NUT™
Standardized design used into console applications. The nut has opposing flats which need to ...
COMPRESSION LIMITERS
Compression Limiters are plain hole metal inserts designed for use in plastic moulded components. Th...
SPIRO®
Spiro® is designed to manage the difficulties of hard brittle thermoset materials. The sharp precisi...
BANC-LOK®
Banc-Lok® are press-in expansion inserts ideal for use in hard thermosetting plastics. It provides m...
COMPRESSION LIMITER ASSEMBLIES
Compression Limiter Assemblies combine the compression limiter with its mating bolt, reducing bolt h...
GRIP-FLOAT™
GRIP-FLOAT™ allows movement of a nut within a slot after installation in the host part. Ideal for u...
BALL STUD
Threaded Ball Studs can be used as a pivot mounting for gas struts in automotive applications includ...
GRIPFORM® Special Design
The M6 nut is heat treated to grade 10, designed to work in mild steel or aluminium around 3.5 - 4.5...
BLIND HOLE MINIATURE INSERT
PSM developed a special Blind Hole Miniature Insert (M1.2 x 6.49) to suit the over-molding processes...
SCREW
This screw is use in the electrical adaptor application. The tamper-proof Torx 8 recess act as a saf...
COMPRESSION SPRING
Compression Spring are open-coiled helical springs made of round wire, designed to resist a compress...
STRAIGHT KNURLING INSERT
This specially developed ´Straight knurled Insert´ combines both a threaded ´Inser...
PIN
Special pin with golden plating in PCB.
FASTENING BUTTON
Special fastening design for insert into wearable devices.
STAINLESS STEEL / AL RIVET
Special design fasteners for Sheet matal board
GRIPFORM® HIGH STRENGTH NUTS
GRIPFORM® nuts are threaded fasteners with unique performance features designed for installation int...
SRS STUD
The SRS stud is a high strength captive stud for sheet metal and thicker plate materials. The head p...
PULLEY STUD®
Pulley Stud® is a patented design used in automotive window regulator assemblies within a car door. ...
SPECIAL STEEL M6 STUD INSERT
The large retaining rings produce high pull out values as required for airbag knee inflator retentio...
M1.0 WELDING NUT
Designed for thin sheet mobile phone applications. Eliminates stripping and torque related failures.
M1.2 WELDING NUT
Designed for thin sheet mobile phone applications. Provide a solution for thinner sheet with a threa...
MINI ALUMINIUM TRI-STEP®
The Mini Aluminium TRI-STEP® Inserts are developed specifically for use in Notebook applications bec...
SELF CLINCHING NUT
The P-S & P-CLS Clinching Nut is a threaded fastener which incorporates a knurled platform and a gro...
SELF CLINCHING STUD
The P-FH Clinching Stud is a threaded fastener which incorporates a knurled platform under the head....
SELF-CLINCHING STANDOFF
Self-Clinching Standoffs are designed to serve as spacers or distance pieces. A simple squeezing act...
FLUSH SELF-CLINCHING NUT
P-F Flush Self-Clinching Nuts have been designed to provide a thread within the sheet thickness to p...
FLANGEFORM® NUTS
FLANGEFORM® Nuts are threaded fasteners with unique ribs designed for installation into thin gauge m...
FLANGEFORM® STUDS
FLANGEFORM® Studs are threaded fasteners with unique ribs designed for installation into thin gauge ...
FLANGEFORM® CLOSED END NUTS
FLANGEFORM® Closed End Nuts are threaded fasteners with unique ribs designed for installation into t...
FLANGEFORM® BALL STUDS
Flangeform® Ball Studs are one piece attachments with unique ribs designed for installation into thi...
HIGH-PERFORMANCE CLINCHING STUDS
High-Performance Clinching Studs are designed to bring higher levels of performance to the P-FH rang...
SELF CLINCHING STUDS FOR STAINLESS STEEL SHEETS
P-FH4 Studs are made out of heat-treated 400 series stainless steel, and can be installed into stain...
BLIND NUTS (P-B / P-BS)
Blind Nuts will encapsulate the internal loose fastener. The blind nut is a quicker and more economi...
MINIATURE NUTS (P-FE / P-FEO / P-FEX / P-FEOX)
Self-Clinching Miniature Nuts provide strong threads in a minimum of space. Miniature Nuts are made ...
ASL TYPE
The ASL type has been designed to incorporate the benefits of nylon collar lock nuts into a serrated...
SELF-CLINCHING PILOT PIN
The Self-Clinching Pilot Pin is a plain stainless steel un-threaded fastener. It incorporates a plat...
BROACHING NUTS (P-KF2)
Broaching Nuts are used with printed circuit boards and other hard or brittle materials. In addition...
BROACHING STUDS (P-KFH)
Broaching Studs are used with printed circuit boards and other hard or brittle materials. In additi...
BROACHING STANDOFFS (P-KFE)
Broaching Standoffs are used for installation into printed circuit boards, and allows screws to be i...
SPRING-TOP STANDOFFS (P-SSC)
Self-Clinching Spring-Top Standoffs are designed for permanent installation into sheet metal. The sp...
SLIDETOP STANDOFFS (P-SKC)
Self-Clinching Slidetop Standoffs are designed for permanent installation into sheet metal. They are...
FLOATING NUTS (P-AC / P-AS / P-LAC / P-LAS)
Self-Clinching Floating Nuts provide a self-clinching fastener body along with an internal floating ...
PANEL FASTENERS(P-PF11, P-PF30, P-PF50/60, P-PFC4, P-PFC2)
Self-Clinching Panel Fastener assemblies are ideal for limited-space applications, and reduce the ri...
ANCHOR® RIVET BUSH
The Anchor® Rivet Bush (ARB) is a threaded fastener which incorporates a serrated shank. This shank ...
MINIATURE ANCHOR® RIVET BUSH / STAND OFF
MINARB® is a miniaturized Anchor® Rivet Bush/STAND OFF designed for use where space is at a premium.
SELF-LOCKING MINARB®
Self-Locking Minarb® is a miniaturized Anchor® Rivet Bush for sheet metal with an inbuilt all-metal ...
SPA SERIES
Threaded spacers and support pillars provide a spacing panels and/or other components with standard ...
SOLID
Solid Tube Compression Limiters have a plain round inside and outside diameter and are easily instal...
MINI SONIC-LOK®
The miniature Sonic-Lok® is designed for rapid installation into thermoplastics using heat or ultras...
MINI-TECH®
Mini-Tech® is a miniature symmetrical insert with the design features and characteristics of the lar...
MINI-SMF
Mini-SMF is a range of miniature threaded fasteners designed for use in thin sheet Mobile Phone appl...
NYLON PATCH PROCESSING
Nylon Patch when applied is permanently fused onto the thread of the screw or threaded component. Th...
MINI DIRECT SCREW FIXING
The miniature TMP screw is designed for use in thermoplastics. The design features a profiled thread...
FLANGEFORM® Ball Studs are one piece attachments with unique ribs designed for installation into thi...
TMA SERIES
TMA series is designed to provide an effective screw fixing in light alloy materials with low instal...
TMS SERIES
TMS series is the cutting notch combined with the profiled thread root providing low installation to...
TMP SERIES
TMP series is designed for use in thermoplastics. The key design features are a profiled thread root...
HEADED COMPRESSION LIMITERS
Headed Tube Compression Limiters offer the benefits of the solid tube compression limiters plus the ...
KNURLED
Knurled solid tube and headed tube compression limiters provide the benefit of a knurled retention f...
OVAL
Oval Compression Limiters are used to datum the component in one plane while allowing radial clearan...
SPLIT
Split-tube Compression Limiters are produced from rolled strip, offering manufacturing and cost bene...
FEED SYSTEMS
Feed Systems for in-die sheet metal fasteners offer considerable cost savings. A variety of options ...